The Tramex CDIK Concrete Determinator Inspector Kit is the full Determinator set for flooring inspectors who produce documented slab surveys. It combines the digital CMEX5, the Determinator in-slab moisture probe, a Hygro-i2 relative humidity probe and the accessories to calibrate-check the meter and assess surface temperature and dew point.
Tramex Meters app for Android and iOS (phone not included)
What the kit does
The CMEX5 gives non-destructive moisture content at the slab surface. Pressed onto the Determinator cradle, with the probe in a pre-drilled 19 mm hole, it reads moisture content within the body of the slab to about 100 mm, in the Tramex Unified Moisture Content Test Method – reading from the bottom up, so you can tell whether moisture is coming from below or above. The Hygro-i2 probe adds in-situ relative humidity, the infrared thermometer gives surface temperature for dew point, and the check plate confirms the meter is reading correctly before the survey.
Specifications
CMEX5
Moisture content, concrete
0 to 6.9%
Gypsum floor screed, comparative
0 to 12
CM equivalent, anhydrite / concrete
0 to 2.7 / 0 to 4.3
Reference scale
0 to 100
Relative humidity (with Hygro-i2 probe)
0 to 99%, ±2% RH at 25 °C
Wood moisture content (with optional pin probe)
5 to 30%
Depth of penetration, concrete
Approximately 20 mm
Determinator probe
Moisture content, concrete (with CMEX5)
0 to 6.9%
Probe depth for slab 5 to 10 cm
3 cm
Probe depth for slab 10 to 15 cm
5.7 cm
Probe depth for slab 15 to 22 cm
8.3 cm
Probe depth for slab 22 to 28 cm
10.8 cm
IRT2 infrared thermometer
Temperature range
−50 °C to 650 °C
Distance to spot
12:1
Accuracy, 20 °C to 300 °C
±1.0% or ±1.0 °C
Emissivity
Adjustable, 0.10 to 1.0
Power
9 V battery
Tramex has not published a separate data sheet for the CDIK. Ask us for the kit's case size and weight if you need them for freight.
Which Determinator kit do I need?
The three kits differ by what is in the case, not by how the probe works.
CDK Concrete Determinator Kit — the probe and case only. No meter. Choose this if you already own a Tramex CME instrument.
CDTK Technicians Kit — probe plus the CMEX5 meter. The working combination for a contractor starting from nothing.
CDIK Inspector Kit — everything in the Technicians Kit plus a Hygro-i2 relative humidity probe, calibration check plate, infrared thermometer, hole liners and extension handle. Specified where a full documented survey is required.
Not on its own. The kit includes one Hygro-i2 probe and hole liners, but ASTM F2170 calls for three test locations for the first 100 m² and one more for each additional 100 m². Add Hygro-i2 probes or the AP-F2170-B pack. A Hygro-i2 probe connects to the CMEX5 through the RHIE2B interface cable – ask us to confirm before ordering if you need one.
How deep does the Determinator read?
In-situ moisture content in the top 19 mm layer and within the body of the slab to an extendable depth of about 100 mm. A slab can be dry on top while still holding moisture below, and the probe is what shows it.
Is the Determinator a replacement for a relative humidity test?
No. It gives quantitative moisture content in the Tramex Unified Moisture Content Test Method. In-situ relative humidity testing is a separate measurement, which is why this kit includes the Hygro-i2 probe. Which one a specification calls for depends on the flooring manufacturer and the standard — ask us if you are unsure.
Is a phone included?
No. The Tramex Meters app is a free download for iOS and Android and runs on your own device.
Not sure whether the CDTK or the CDIK suits your slab testing? Contact The Moisture Meter Company before you order.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Refund Policy
Cancellation and Returns Policy
Unless otherwise stated in the product description, The Moisture Meter Company allows the return of products for 7 days from delivery in the following cases:
physical damage to the product
the product is defective **(where no warranty is offered by the original manufacturer)
the product is significantly different from the description (wrong size, colour, quality or material related issues)
Unless otherwise stated in the product description the product must be in its original condition. Only unused, unaltered, not soiled products will be accepted, brand packaging should be intact, replacements will be made if the product is available within a reasonable time.
To return a product, you can raise a return request at by calling us on 1800 68 68 69 or by email at info@moisturemeters.com.au, and by providing the following details: Name and contact details, date of purchase, invoice number or order ID, images clearly demonstrating damage, or a description of the defect or missing and incomplete product.
After receiving your request The Moisture Meter Company will confirm the return request and will inform you about the pickup process. Please ensure that the product is in unused and original condition. Include all labels, original packing, and invoice along with the product.
** Original Manufactures Warranty
Faulty products and manufacturing defects in most cases are warranted by the original manufacturer of the product. Call or email to determine if your product is covered under warranty. Post receiving your request The Moisture Meter Company will confirm your request and will inform you about the warranty process.
