The Tramex WDMK Water Damage Restoration Master Kit puts moisture content and relative humidity testing, and ambient monitoring, in one case. It is built for water damage inspectors, restoration technicians and building surveyors who need to test concrete, timber, drywall, plaster, tile and other building materials, then document the drying.
Tramex Meters app for Android and iOS (phone not included)
What each instrument does
ME5 – walls, floors and coverings
Dual-depth, non-destructive testing of drywall, wood, plaster, brick, tiles, resilient flooring, laminates and roofing. Reading at two depths from the same spot shows whether moisture sits in a covering or in the substrate under it.
CMEX5 – concrete, plus RH and pin modes
Non-destructive quantitative moisture content in concrete, using gravimetric testing as the baseline, plus comparative testing and ambient conditions. Its bayonet port takes the pin probe for timber and drywall (and WME in other materials), and Hygro-i2 RH probes for in-situ testing of concrete, building materials, structures and air spaces.
DL-RHTX – logging
The Feedback Datalogger records relative humidity, temperature and dew point in the room, or in materials and air spaces with a probe connected, and sends the data to the app over Bluetooth. An overnight log is stronger drying evidence than a single spot reading.
Infrared thermometer
Surface temperature, used with the CMEX5 hygrometer to work out dew point and condensation risk.
App
The Tramex Meters app geotags results, creates and shares reports, photos and charts, and mirrors the meter screen on your phone when the meter is on the extension handle or out of sight.
Specifications
CMEX5
Moisture content, concrete
0 to 6.9%
Gypsum floor screed, comparative
0 to 12
CM equivalent, anhydrite / concrete
0 to 2.7 / 0 to 4.3
Reference scale
0 to 100
Relative humidity (with Hygro-i2 probe)
0 to 99%, ±2% RH at 25 °C
Wood moisture content (with pin probe)
5 to 30%
Depth of penetration, concrete
Approximately 20 mm
Size and weight
180 x 85 x 40 mm, 357 g
ME5
Wood moisture content
5 to 30%
Reference scale, building materials
0 to 100
Depth of penetration
Shallow up to 10 mm, deep up to 30 mm
Size and weight
160 x 85 x 38 mm, 270 g
DL-RHTX datalogger
Memory
100,000 data point entries
Transmission range
Up to 50 m line of sight, Bluetooth Low Energy
RH sensor
0 to 100% RH; ±1.5% RH (0 to 80%), ±2.0% RH (80 to 99%) at 25 °C; resolution 0.1%; drift under 0.25% RH per year
The practical differences: the WDTK is the analogue pair with no logging. The WDIK adds the digital CMEX5, a datalogger, pin probe and RH wand. The WDMK adds a Hygro-i2 in-situ probe and hole liners and swaps to the longer RH wand. The WDMK-X swaps the analogue ME5 for the digital MEX5, which adds its own hygrometer, surface thermometer and probe ports.
Generally yes, and it removes the risk of ordering an accessory with the wrong connector. Every component is also sold individually if you would rather build up over time.
What connector do the accessories use?
The CMEX5 and DL-RHTX use the bayonet connector, so any probes added later must be the “B” suffix versions. The AP-F2170-B accessory pack is the matching in-situ RH kit.
Can I run a full ASTM F2170 slab test with this kit?
Not on its own. The kit includes one Hygro-i2 probe and hole liners, but ASTM F2170 calls for three test locations for the first 100 m² and one more for each additional 100 m². Add Hygro-i2 probes, or the AP-F2170-B pack.
Is the Hygro-i2 interface cable included?
Tramex's kit data sheet does not list the RHIE2B interface cable that connects a Hygro-i2 probe to the CMEX5 or DL-RHTX. Ask us to confirm before you order if you need it.
Is a phone included?
No. The Tramex Meters app is a free download for iOS and Android and runs on your own device.
Weighing up the WDTK, WDIK, WDMK and WDMK-X? Contact The Moisture Meter Company and we will match the kit to the inspections and drying jobs you do.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Estimate shipping
Refund Policy
Cancellation and Returns Policy
Unless otherwise stated in the product description, The Moisture Meter Company allows the return of products for 7 days from delivery in the following cases:
physical damage to the product
the product is defective **(where no warranty is offered by the original manufacturer)
the product is significantly different from the description (wrong size, colour, quality or material related issues)
Unless otherwise stated in the product description the product must be in its original condition. Only unused, unaltered, not soiled products will be accepted, brand packaging should be intact, replacements will be made if the product is available within a reasonable time.
To return a product, you can raise a return request at by calling us on 1800 68 68 69 or by email at info@moisturemeters.com.au, and by providing the following details: Name and contact details, date of purchase, invoice number or order ID, images clearly demonstrating damage, or a description of the defect or missing and incomplete product.
After receiving your request The Moisture Meter Company will confirm the return request and will inform you about the pickup process. Please ensure that the product is in unused and original condition. Include all labels, original packing, and invoice along with the product.
** Original Manufactures Warranty
Faulty products and manufacturing defects in most cases are warranted by the original manufacturer of the product. Call or email to determine if your product is covered under warranty. Post receiving your request The Moisture Meter Company will confirm your request and will inform you about the warranty process.
