Description
The Wagner Orion® 930 Dual Depth Moisture Meter has the versatility needed for flooring, quality control, woodworking and inspection work.
The Orion 930 Dual Depth Pinless Wood Moisture Meter Kit features the Orion 930, which measures moisture content from the surface down to 6.4 mm (0.25 in) in shallow mode or 19 mm (0.75 in) in deep scan mode, inside wood or other material. A flexible rubber boot makes the 930 durable enough for tough jobs.
The Orion 930 joins the rest of the Orion line as the first meters in the industry, Wagner states, to provide true in-the-field calibration with the included On-Demand Calibrator. Calibrate your Orion 930 at your location in about 30 seconds whenever you want.
The Orion line continues Wagner's 50-plus year tradition of accurate, dependable, non-damaging pinless moisture measurement, measuring in the wood rather than just on it, and is backed by Wagner's 7-year warranty.
The Orion 930 Kit Includes
- Orion 930 wood moisture meter
- Paired On-Demand Calibrator
- Rubber protective boot
- Foam-lined ABS plastic carrying case
- 9 V battery
- Species settings booklet
- Instruction manual
- Common flooring materials settings reference card
Which Orion Do You Need?
| Model | Reading depth | Data storage | Notes |
|---|---|---|---|
| Orion 910 | 19 mm (0.75 in) deep | No | Replaces the MMC220 |
| Orion 920 | 6.4 mm (0.25 in) shallow | No | Thin stock and coatings |
| Orion 930 (this kit) | 6.4 mm and 19 mm (dual) | No | Flooring, QC, woodworking, inspection |
| Orion 940 | 6.4 mm and 19 mm (dual) | Up to 100 readings, manual or automatic, high-low-average | QC and property restoration records |
| Orion 950 | 6.4 mm and 19 mm (dual) | Up to 100 readings; Bluetooth to FloorSmart and Woodshop MC apps | Built-in temperature/RH sensor, dew point, EMC, GPP/GPK |
All five share the same moisture range, species range, housing, On-Demand Calibrator and warranty. Choose on reading depth and whether you need to record data.
Meter Features
Dual Depth Measurements
The 930 reads from the surface down to 6.4 mm (0.25 in) in shallow scan mode, or down to 19 mm (0.75 in) in deep scan mode. Comparing the two readings on the same spot shows whether moisture is near the surface or deeper in the board.
IntelliSense™ Technology
Orion 910, 930, 940 and 950 meters use IntelliSense technology in their 19 mm (¾ in) deep reading modes. This enables accurate determination of moisture content deeper in the wood while minimising the effect surface moisture has on the readings. Pin-type meters can bypass surface conditions, but they damage the surface of the wood every time a reading is taken.
Fast Selection Species Settings
Simple up/down arrow buttons set the meter for the wood species you need to measure. Wagner states the range of settings accommodates practically any softwood or hardwood species in the world. The Orion 930 can also be configured for some non-solid wood products such as plywood, OSB or MDF, and Orion meters have species settings for many bamboo flooring products.
Non-Damaging Pinless Sensor
Every Orion meter uses electromagnetic wave technology, a non-damaging way to measure the moisture content of wood or other materials quickly. Compared with pin meters, the pinless sensor does not damage the wood and eliminates the frustration and cost of broken pins.
Virtually Unaffected by Temperature
Wagner states every Orion pinless meter is virtually unaffected by the temperature of the wood or the environment. Unlike pin meters, the sensing technology does not need correction for wood temperature.
True In-the-Field Calibration
There is no need to return an Orion to the factory for calibration. Every Orion comes with an individually paired On-Demand Calibrator, so you can calibrate the meter on site in about 30 seconds whenever you want. A NIST-traceable version with a certificate of calibration can also be purchased. (Wagner lists the calibrator as patent pending.)
Relative Moisture Measurement Mode
A relative mode allows relative moisture measurements in non-wood-based materials and engineered wood flooring, so the meter can be used to compare moisture conditions in a number of non-wood building materials and flooring products. Relative readings are comparisons, not % moisture content.
Press to Hold Readings
Press the ON/HOLD button once and the meter holds the reading, which is useful when measuring in hard-to-reach areas.
Programmable Alarm
The Orion 930 includes a user-programmable audible alarm for high moisture content levels.
7-Year Warranty
Wagner includes the Orion line of pinless moisture meters in its Genuine Wagner 7-Year Warranty programme, which Wagner describes as the longest-lasting warranty in the industry. Ask us how warranty claims are handled for meters bought through us.
Specifications
| Moisture content range | 4.0–32.0% (Wagner; varies by species) |
|---|---|
| Reading depth | 6.4 mm (0.25 in) shallow or 19 mm (0.75 in) deep |
| Species range | 0.20–1.0 specific gravity |
| Operating temperature | 0 °C to 43 °C (32 °F to 110 °F) |
| Dimensions (with boot) | 146 × 76 × 25 mm (5.75 × 3.0 × 1.0 in) |
| Weight (with boot) | 204 g (7.2 oz) |
| Power | 9 V battery |
| Auto shut-off | 60 seconds |
| Warranty | 7 years (Wagner) |
| Wagner part number | 890-00930-001 |
Operating Advice
- Calibrate with the paired On-Demand Calibrator before a critical job and after any drop. The calibrator is paired to its meter, so keep them together.
- Set the species (or specific gravity) before reading. A wrong species setting is the most common source of error with any pinless meter.
- Hold the sensor flat and in full contact with the surface. Take several readings across each board rather than relying on one.
- For flooring, compare the timber with the subfloor and allow it to acclimatise before installation, following the flooring manufacturer's moisture limits.
- For concrete slabs, use a concrete meter such as the Wagner C555 for surveys and Rapid RH L6 in-situ RH testing for the final test. Relative mode on an Orion is not a slab moisture test.
Frequently Asked Questions
Pinless or pin meter?
Pinless meters read an area without marking the surface, which is why they suit finished flooring, joinery and restoration inspections. Pin meters read between two points and can reach below surface conditions, but they leave holes.
Does surface moisture affect the reading?
Any surface water will influence a pinless reading. Wipe the surface dry first. In the 19 mm deep mode, IntelliSense technology minimises the effect of surface moisture.
Will it read Australian hardwoods?
Mostly, using the species setting or specific gravity. The meter accepts specific gravities from 0.20 to 1.0. Some very dense Australian hardwoods exceed 1.0, so check your species' specific gravity before relying on the reading.
How is it calibrated?
With the paired On-Demand Calibrator supplied in the kit, on site, in about 30 seconds. A NIST-traceable calibrator with a certificate is available.
Why dual depth?
One meter covers thin stock and solid timber, and comparing shallow and deep readings on the same spot helps tell surface wetting from moisture held deeper in the wood.
What battery does it use?
A standard 9 V battery, included. The meter switches itself off after 60 seconds without use.
Not sure which Orion suits your work? Tell us what you measure and we will help you choose before you order. See the full Wagner range.
Estimate shipping
Refund Policy
Refund Policy
At The Moisture Meter Company (TMMC), a division of Carpet Cleaners Warehouse, we are committed to complying with the Australian Consumer Law (ACL) and providing fair outcomes for our customers.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement, repair, or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
Damaged, Faulty or Incorrect Goods
If you receive a product that is damaged in transit, faulty, defective, or incorrectly supplied, please contact us as soon as possible.
To assist with assessment, we may request photographs, serial numbers, proof of purchase, or other information relevant to the claim.
Where a product is confirmed to be faulty, damaged, incorrectly supplied, or otherwise covered under Australian Consumer Law, TMMC will provide an appropriate remedy, which may include:
- Repair
- Replacement
- Store credit
- Refund
TMMC will cover reasonable return shipping costs for approved warranty, fault, damage, or incorrect supply claims.
Change of Mind Returns
TMMC may, at its sole discretion, accept returns for change of mind within 14 days of delivery, provided that:
- The return is approved by TMMC before being sent back.
- The product is unused and in original condition.
- The product is returned in its original packaging.
- All accessories, manuals, and included items are returned.
- The product is not a special order, made-to-order, clearance, consumable, or non-returnable item.
Approved change of mind returns may be subject to a restocking fee and the customer is responsible for all return shipping costs.
Original freight charges are non-refundable unless required under Australian Consumer Law.
Non-Returnable Items
Unless required under Australian Consumer Law, the following items cannot be returned for change of mind:
- Special order products
- Made-to-order products
- Hygiena swabs, test reagents and other consumables
- Probes, electrodes and pins that have been used
- Products specifically marked as non-returnable
- Clearance or end-of-line items
Return Process
Before returning any product, customers must obtain return authorisation from TMMC.
Please contact us using one of the methods below:
- Phone: 1800 68 68 69
- Email: info@moisturemeters.com.au
Returns sent without prior approval may be refused or delayed.
Refund Processing
Approved refunds will be processed to the original payment method used for the purchase unless otherwise agreed.
Refunds are generally processed after the returned product has been received, inspected, and approved.
Processing times may vary depending on the payment provider.
Warranty Claims
Many products sold by TMMC are also covered by manufacturer warranties. These are in addition to your rights under the Australian Consumer Law.
Warranty claims may require inspection, testing, repair, replacement, or manufacturer assessment before a final outcome is determined.
Equipment must be returned to TMMC in Queensland for warranty assessment. The customer pays freight to return the item; if a covered fault is confirmed, TMMC reimburses that freight and pays return freight. If the fault is not covered, we will provide a written quote before any work is done.
Business Customers
Nothing in this policy excludes, restricts, or modifies any rights available under Australian Consumer Law.
Where permitted by law, remedies available for goods supplied for business use may be limited in accordance with applicable legislation.
Contact Us
The Moisture Meter Company
Phone: 1800 68 68 69
Email: info@moisturemeters.com.au
Queensland
D1-3/194 Zillmere Road, Boondall QLD 4034
Victoria
Unit 1/5 Gatwick Road, Bayswater North VIC 3153
This policy was last updated on 18 November 2026.

