Description
Hygiena's™ SystemSURE Plus is the world's best-selling ATP Sanitation Monitoring System (Hygiena's description). With improved functionality, new software, and increased memory, the SystemSURE Plus meets the demands of the cleaning and restoration companies around the world.
This listing is the meter only (Hygiena code SS3). If you are starting from nothing, the SystemSURE Plus Starter Kit adds 100 UltraSnap swabs, a carrying case and a meter stand.
What Is ATP Testing?
The ATP test is a process of rapidly measuring actively growing microorganisms through the detection of adenosine triphosphate, or ATP.
ATP is a molecule found in and around living cells, and as such it gives a direct measure of biological concentration and health. ATP is quantified by measuring the light produced through its reaction with the naturally occurring firefly enzyme luciferase using a luminometer. The amount of light produced is directly proportional to the amount of ATP present in the sample.
What a reading is and is not: ATP is present in organic residue generally — food soil, body fluids, biofilm and the cells within them — not only in living microorganisms. A reading in relative light units (RLU) tells you how much organic residue is on the surface. It does not identify organisms and it is not a microbial count. Use it to verify that cleaning removed the soil; use laboratory microbiological sampling where a job needs organisms identified or counted.
Why Use ATP Testing?
With ATP testing, a restoration contractor can test the initial condition of surfaces and standing water to determine the level of contamination and thus categorize the loss more accurately as 1, 2 or 3.
The testing can also be used during the cleaning and drying processes to determine progress. And finally, at the completion of the job, testing can verify clean and sanitary materials and surfaces.
Keep the categorisation point in proportion: an ATP result is supporting evidence, not the classification itself. Water category is decided from the source of the water, how long it has been there and what it has contacted, as your restoration standard sets out. A high reading supports treating the loss as contaminated; a low reading on its own does not make a loss Category 1.
SystemSURE Plus Benefits
As listed by Hygiena:
- Most cost-effective ATP hygiene monitoring system available
- Provides real-time feedback and facilitates long-term data analysis
- Optimizes and verifies that cleaning procedures are working
- Assists in developing and improving process and risk assessment programs (ie. HACCP & GMPs)
- No scheduled yearly maintenance is necessary
- Available Calibration Control Kit for in-house confirmation of calibration
- Complimentary SureTrend Software
SystemSURE Plus Specifications
- Sensitive - can detect down to 1 femtomole (1 x 10-15 moles) of ATP
- Advanced photodiode sensor offers low variation and stays in calibration
- Calibration self-check at start up with optional full diagnostic check mode
- The symbol keypad is easy for any user to understand and navigate
- Powered by 2 x AA batteries for several months of uninterrupted use
- Memory capacity:
- 100 programmable test plans
- 200 programmable user IDs
- 251 programmable locations per test plan
- 5,000 programmable test locations
- Small, lightweight, handheld instrument (0.57 lbs., 7.6 x 17.8 x 3 cm)
- Quick-test mode enables ad-hoc testing
- Large viewable screen with back-light and optional bold text
- Removable read chamber for easy cleaning
- Connects to SureTrend software via USB
At a Glance
| Brand / model | Hygiena SystemSURE Plus (SS3) |
|---|---|
| SKU | HGSS3 |
| Sensor | Photodiode |
| Detection limit | 1 femtomole (1 × 10-15 mol) ATP |
| Result time | About 15 seconds (Hygiena) |
| Power | 2 × AA batteries — Hygiena quotes up to 8–12 months of use |
| Size | 7.6 × 17.8 × 3 cm |
| Weight | 0.57 lb (about 260 g) |
| Results memory | 2,000 test results (Hygiena) |
| Data connection | USB to SureTrend software (cable sold separately) |
| Calibration check | Start-up self-check; CalCheck for in-house verification (sold separately) |
| Warranty | Not published by Hygiena — ask us |
Which Tests It Reads
Hygiena lists the SystemSURE Plus as compatible with its UltraSnap surface ATP test and AquaSnap water ATP test, and with its other luminometer-read test devices. The Hygiena tests we carry:
- Hygiena UltraSnap ATP Surface Test Swab (100pk) — the standard surface test; also in a 2,000 pack
- Hygiena SuperSnap (100pk) — higher-sensitivity surface test
- Hygiena AquaSnap Total (100pk) — water and rinse water
The PRO-Clean and SpotCheck Plus tests are colour-change tests read by eye — they do not need the meter.
Third-party swabs: Anaeron lists its CleanTrust ATP Surface Swab as compatible with the SystemSURE Plus. Hygiena lists only its own tests. If you mix brands, set a separate baseline and limits for each swab type — RLU figures from different swab chemistries are not interchangeable.
Using It Well
- Let the tests warm up. Hygiena's UltraSnap instructions call for the device to reach 21–25 °C before testing. A swab straight from the fridge reads low.
- Swab the same way every time. A 10 × 10 cm area in a criss-cross pattern is Hygiena's standard for flat surfaces. Results are only comparable when the sampling is.
- Read promptly. Insert the activated swab within 30 seconds (UltraSnap instructions). The SystemSURE Plus gives the result in about 15 seconds.
- Set your own limits. The meter supports programmable pass, caution and fail limits. Build them from readings on surfaces you know are properly cleaned, not from a number copied from someone else's procedure.
- Sanitiser still on the surface can suppress the reading. Sample after cleaning and before sanitising, or allow for it in your procedure.
Calibration and Data
The meter runs a sensor self-check at start-up. For in-house confirmation between checks, Hygiena's reusable CalCheck replaces the older PCD4000 Calibration Control Kit. A CalCheck verifies the meter; it does not adjust it — a failed check means contact us.
Results transfer to Hygiena's SureTrend software over USB using the SystemSURE Plus USB cable. Hygiena now also offers SureTrend as a cloud platform; confirm with us which version and licence applies before you build a reporting system around it.
Frequently Asked Questions
What comes with the meter-only listing?
The luminometer. Hygiena supplies the SystemSURE Plus with a protective carrying case and shoulder strap; confirm with us what is in the box on current stock. Swabs, the USB cable and the CalCheck are sold separately.
Does it need annual calibration?
Hygiena says no scheduled yearly maintenance is needed. Use the CalCheck to confirm the meter is reading correctly between checks.
Can it tell me whether a surface has bacteria or mould on it?
No. It measures ATP, which is present in organic residue generally. It shows how clean a surface is, not which organisms are on it.
SystemSURE Plus or EnSURE Touch?
Both read Hygiena's ATP tests. The EnSURE Touch has a touch screen, Wi-Fi data transfer and a 10-second read. The SystemSURE Plus is the simpler keypad meter with USB download.
Can I use CleanTrust swabs in it?
Anaeron says yes; Hygiena lists only its own tests. See "Which Tests It Reads" above, and keep separate limits for each swab brand. CleanTrust also make their own Touch YZ3500 luminometer.
Related Products
- Hygiena SystemSURE Plus Starter Kit
- Hygiena UltraSnap ATP Surface Test Swab (100pk)
- Hygiena CalCheck
- Hygiena SystemSURE Plus USB Cable
- All Hygiena products
Setting up ATP testing for restoration sign-off? Tell us what you need to demonstrate and to whom, and we will help you choose the meter, tests and sampling routine.
Estimate shipping
Refund Policy
Refund Policy
At The Moisture Meter Company (TMMC), a division of Carpet Cleaners Warehouse, we are committed to complying with the Australian Consumer Law (ACL) and providing fair outcomes for our customers.
Australian Consumer Law
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement, repair, or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
Damaged, Faulty or Incorrect Goods
If you receive a product that is damaged in transit, faulty, defective, or incorrectly supplied, please contact us as soon as possible.
To assist with assessment, we may request photographs, serial numbers, proof of purchase, or other information relevant to the claim.
Where a product is confirmed to be faulty, damaged, incorrectly supplied, or otherwise covered under Australian Consumer Law, TMMC will provide an appropriate remedy, which may include:
- Repair
- Replacement
- Store credit
- Refund
TMMC will cover reasonable return shipping costs for approved warranty, fault, damage, or incorrect supply claims.
Change of Mind Returns
TMMC may, at its sole discretion, accept returns for change of mind within 14 days of delivery, provided that:
- The return is approved by TMMC before being sent back.
- The product is unused and in original condition.
- The product is returned in its original packaging.
- All accessories, manuals, and included items are returned.
- The product is not a special order, made-to-order, clearance, consumable, or non-returnable item.
Approved change of mind returns may be subject to a restocking fee and the customer is responsible for all return shipping costs.
Original freight charges are non-refundable unless required under Australian Consumer Law.
Non-Returnable Items
Unless required under Australian Consumer Law, the following items cannot be returned for change of mind:
- Special order products
- Made-to-order products
- Hygiena swabs, test reagents and other consumables
- Probes, electrodes and pins that have been used
- Products specifically marked as non-returnable
- Clearance or end-of-line items
Return Process
Before returning any product, customers must obtain return authorisation from TMMC.
Please contact us using one of the methods below:
- Phone: 1800 68 68 69
- Email: info@moisturemeters.com.au
Returns sent without prior approval may be refused or delayed.
Refund Processing
Approved refunds will be processed to the original payment method used for the purchase unless otherwise agreed.
Refunds are generally processed after the returned product has been received, inspected, and approved.
Processing times may vary depending on the payment provider.
Warranty Claims
Many products sold by TMMC are also covered by manufacturer warranties. These are in addition to your rights under the Australian Consumer Law.
Warranty claims may require inspection, testing, repair, replacement, or manufacturer assessment before a final outcome is determined.
Equipment must be returned to TMMC in Queensland for warranty assessment. The customer pays freight to return the item; if a covered fault is confirmed, TMMC reimburses that freight and pays return freight. If the fault is not covered, we will provide a written quote before any work is done.
Business Customers
Nothing in this policy excludes, restricts, or modifies any rights available under Australian Consumer Law.
Where permitted by law, remedies available for goods supplied for business use may be limited in accordance with applicable legislation.
Contact Us
The Moisture Meter Company
Phone: 1800 68 68 69
Email: info@moisturemeters.com.au
Queensland
D1-3/194 Zillmere Road, Boondall QLD 4034
Victoria
Unit 1/5 Gatwick Road, Bayswater North VIC 3153
This policy was last updated on 18 November 2026.

